Looking for input. I’ve got a 4” to 1.5” flared flex cap for the base but trying to adjust the pipe ever so slightly seems to be troublesome. Any thoughts?
You must log in or # to comment.
Two 45 or 22 degree fittings like this and a new cap/coupling reducer.
Cut the pipes and glue in new pieces to reconnect
/thread
If it’s just a little bit off, you can use a heat gun to heat the PVC until it is a little bit bendable. Then you can gently bend it into shape so it connects to the spot you need it to. Just make sure to heat the pipe evenly from all sides and don’t kink the pipe when you bend it.
Never heat gun PVC, get it JUST a little too hot and your lungs are shot forever.