I’m not sure Home Improvement is the correct sub for this, but I’m looking to replace my dual flush actuators with metal ones instead of these chromes plastic ones that corroded due to the bleach fumes from using bleach bricks in the tanks. I’ve stopped using them, but I still need to replace the actuators or buttons and I want something more robust.

Edit: went ahead and ordered duplicate replacements.

  • Cenzorrll@lemmy.world
    link
    fedilink
    arrow-up
    4
    ·
    15 days ago

    Metal ones will degrade much faster than plastic if you’re putting bleach in the tank. It’s best to just clean the bowl as the tank shouldn’t really need sanitizing.

    • NJSpradlin@lemmy.worldOP
      link
      fedilink
      arrow-up
      3
      ·
      15 days ago

      Exactly, that’s why I mentioned that I stopped using the bricks. I just want more robust buttons to replace the corroded ones, now.

      • FartsWithAnAccent@fedia.io
        link
        fedilink
        arrow-up
        3
        ·
        15 days ago

        Those bricks also corrode the gaskets for the tank. I would recommend avoiding them in the future and your toilet is probably eventually going to start leaking. They sell gasket rebuild kits though, they aren’t super expensive.

        • NJSpradlin@lemmy.worldOP
          link
          fedilink
          arrow-up
          5
          ·
          edit-2
          15 days ago

          I already broke everything down and replaced the seal inside the tank. That’s why I was going to replace the actuators this week, too.

          Having not received any good metal options from here, or from searching, I’ll probably just end up buying identical replacements to the originals.

          But, yes. I stopped using the bricks because of the harm of the parts and seals within the tank water, on top of the corrosion to the actuators themselves.

          Edit: went ahead and ordered duplicate replacements.

  • hemko@lemmy.dbzer0.com
    link
    fedilink
    English
    arrow-up
    3
    ·
    edit-2
    15 days ago

    I think metals are not correct materials for these, because it’d always feel cold to touch and just a little uncomfortable

  • manualoverride@lemmy.world
    link
    fedilink
    arrow-up
    1
    ·
    15 days ago

    How about carving replacement buttons and bezel out of some hardwood? Finished with an epoxy based varnish it should resist the bleach fumes.

    • BearOfaTime@lemm.ee
      link
      fedilink
      arrow-up
      2
      ·
      edit-2
      15 days ago

      Oh, man, you luddite.

      I like the way you think! Such an odd choice for the location, something you just never see. And sealed like you describe, would hold up as well as anything else.