Basically I want to have a computer to experiment with that is 100% free and open source and that doesn’t break the bank. My current idea is to use a RISCV board like the mango pi and use FreeBSD on it. I only use terminal applications expect for the browser so I’m not too worried about performance. But also I have never done anything like this before, this is really just to mess around and learn. But I’m looking for some advice what are the best RISCV boards and is it even worth it? Plus is it even possible to build a 100% free and open source computer with a RISCV board? I am currently doing research into this and this is part of my research lol, thank you.

  • bruhbeans@lemmy.ml
    9·
    2 years ago

    I think the MNT Reform and MNT Pocket might be the closest you can get. They use an iMX8 board that uses no firmware blobs.

  • pancake@lemmy.ml
    8·
    2 years ago

    Theoretically current RISCV boards are not fully open since the processor itself is not. That might or might not matter to you, but you can always use an FPGA board. Anyway, hmu for anything, it’s nice to help with projects as a community :)

  • TWeaK@lemmy.ml
    8·
    2 years ago

    “Fully open source”, to me, would imply open source hardware. However basically any device you get these days has a security chip which is a complete black box to the user. Intel have the Intel Management Engine, AMD have their own version and even mobile phones have them too.

    You basically have to run Linux on a potato to get fully open source.

  • Rentlar@lemmy.ca
    4·
    2 years ago

    So I think it’s worth clarifying your scope in terms of what must be open source and what can be proprietary, especially on the hardware side. On one end you can get any random prebuilt off the street and run LinuxFromScratch, FreeBSD or what have you.

    On the other extreme, do you need a CPU, GPU chip, camera module etc. to have released their full specifications and code, do the exact manufacturing blend of the solder you use need to be released?🤣

    One site that might be of interest to you is pine64.org, they make open source ARM based phones, boards, laptops and tablets.

    • africavoid@lemmy.mlOP
      3·
      2 years ago

      I don’t know if this will really clarify things but i’m looking for as much freedom as a librebooted x200 thinkpad with parabola or something as the OS, and thanks for the site I forgot about pine64 I was looking at their phones a couple of years ago

  • teri@discuss.tchncs.de
    1·
    2 years ago

    Open-source chips is probably the difficult part about it. There’s RISCV CPUs with open-source high-level description - but the physical devices are not open-source (for example the physical layout). There’s some people running soft-CPUs on FPGAs. This way the circuit of the CPU is open-source but the FPGA fabric is not. I believe (and/or hope) that the situation might improve in the next decades. There’s some chip fabs which start to allow creating fully open-source chips (Skywater in the US, IHP in EU). Yes, most chip fabs are actually forbidding to create open-source chips.

    This might be inspiring: https://mntre.com/

  • Asiaticus@lemmy.ml
    1·
    2 years ago

    A lot of people would suggest GNU/Linux as operating system, my suggestion is FreeBSD.

    1. It runs rock solid.
    2. It runs on a lot of platforms. Architectures
    3. There is only one FreeBSD and not a hundred of distros.
    4. It has a very good BHYVE (virtual machine) and Jails architecture.
    5. One can run Linux Apps (no emulation!) within FreeBSD.
    6. There are a lot of applications, which you can find at FreshPorts, explained at one place and the possibility to contact the port manager.
    7. A lot of desktop environments and window managers. e.g. WindowMaker, what can be very slim and usable.
    8. It is very well documented: FreeBSD Handbook

    Just my 5 (8)Cents. ;)